Reasoning5–8 minBurden: MediumEMA: Low

Figure Series

A figural inductive reasoning task: a row of four figures changes by one to three rules, and the participant chooses the figure that comes next out of four. Every item is generated from a seed.

Inductive reasoningFluid reasoningFigural reasoning
Category
Reasoning
Typical duration
5–8 min
Participant burden
Medium
EMA suitability
Low

Try this task

Configure parameters and run an interactive preview exactly as participants will experience it. No data is recorded.

Configure preview

Adjust parameters below, then start the preview on the right.

Include practice trials

Shown with feedback before the main task

Task parameters

Shared evenly across the levels, easiest first. Default 15: 5 per level, as in Harris et al. (2020).

With feedback; one per level in turn. Default 3 (our choice; no published value).

Levels

The number of rules per row, as in the one-, two- and three-relation items of the Sandia Matrices (Matzen et al., 2010), which get harder in that order (Harris et al., 2020). Rules: rotation by 45° or 90°, a dot moving around the edge, one shape more or fewer, and the fill cycling through two or three of empty, striped and filled (rule types of Carpenter, Just & Shell, 1990).

Default none: time pressure lowers accuracy in matrix tests (Gonthier, 2023). Krautter et al. (2021) capped figural matrices at 90 s per item. An item not answered in time counts as an omission.

Default off (our choice, for the reason given for the limit per item). A published timed figural series is the Series subtest of the CFT 20-R: 15 items (a row of three figures, five options) in 4 min, about 16 s per item (Visser et al., 2022; Borter, Schlegel & Troche, 2023), which would be 4 min for 15 items here. Borter et al. (2023) separated a speededness factor from reasoning in such time-limited scores. With a block limit, the items come in order without going back, a countdown is shown, the item on screen when the time is up is kept but not scored, and items never shown are reported as not reached. Practice is not timed.

Empty: each participant gets a new form, and the seed it was drawn from is stored with the result. The same seed gives every participant the same items.

Four options per item, built so that the answer cannot be found from the options alone: they combine the right and one wrong value of two of the item’s dimensions, so every value appears equally often (facet design; Pallentin, Danner & Rummel, 2023; Hu et al., 2021). With four options, two dimensions are tested: at level 3 two of the three rules, chosen per item. About 7 min with these settings. Outputs: correct, answered, accuracy per level and per rule, median RT of correct answers, and with a block limit the items not reached; each trial stores the panels, the options and which rules the chosen option breaks.

5–8 minBurden: MediumEMA: Low

This is a researcher preview. No participant data is recorded.

Simulated participant view

9:41

Figure Series

A figural inductive reasoning task: a row of four figures changes by one to three rules, and the participant chooses the figure that comes next out of four. Every item is generated from a seed.

No data is recorded

Participant experience on smartphone

Four panels in a row, then a dashed panel with a question mark; below them four option panels in a 2 × 2 grid, tapped to answer. Figures are drawn in one dark ink on white: shapes that point one way (so every rotation shows), a dot on one of eight places around the edge, one to five shapes, and empty, striped or filled shapes, so no rule depends on colour.

When to use

For a reasoning measure with many parallel forms: items are generated, so sessions can use new items (no seed) or one fixed form (a set seed). Suited to baseline and occasional sessions, and to studies of the figure-series items used in aptitude and selection tests.

When not to use

Not a normed intelligence test: the items follow published rule types and distractor principles, but have no norms or IRT parameters yet. Not a quick EMA probe. For 3 × 3 matrices with generated items, use Figure Matrices (Matrix Reasoning has 15 fixed items).

How to use in a study

The defaults give 15 items, 5 per level, levels 1 to 3 (one, two and three rules), easiest first, without a time limit. Leave the seed empty to give each participant and each session new items; set a seed to give everyone the same form. Per-level accuracy shows where performance breaks down; the trial data say which rules a chosen wrong option breaks. A time limit per item moves the task towards speed: even mild time pressure lowers accuracy in Raven's matrices (Gonthier, 2023).

Researcher-configurable parameters

  • Number of items: default 15, 5 per level (Harris et al., 2020, gave 5 items per Sandia Matrices item type)
  • Levels: 1, 2 and 3 rules per row (the one-, two- and three-relation items of Matzen et al., 2010; Harris et al., 2020)
  • Time limit per item: default none (Gonthier, 2023); Krautter et al. (2021) capped figural matrices at 90 s per item
  • Time limit for the whole block: default off; the CFT 20-R series subtest allows 4 min for 15 items (Visser et al., 2022). Time limits add a speed component to the score (Borter et al., 2023)
  • Seed: empty (new items per run; the seed is stored with the result) or a number (the same items for everyone)
  • Practice items with feedback: default 3, one per level (our choice; no published value)

Outputs collected

  • Correct answers and items answered
  • Accuracy per level and per rule (rotation, moving dot, number of shapes, fill)
  • Median RT of correct answers
  • Every trial: level, rules, the four panels, the options, the correct option, the response, the rules the chosen option breaks, touch-down RT, time-outs
  • The seed, from which every item of the run can be rebuilt

Interpretation notes

Rules (the rule types of Carpenter, Just & Shell, 1990): the shapes turn by 45° or 90° per step, a dot moves one or two places around the edge, there is one shape more or fewer per step, or the fill cycles through two or three of empty, striped and filled; any other dimension stays constant along the row. Options: when every distractor changes one feature of the answer, the answer is the option that shares the most features with the others and can be found without looking at the row (Hu et al., 2021; for published matrices tests, Mittring & Rost, 2008). Here the four options are a 2 × 2 facet design instead: the right and one plausible wrong value (the step in the wrong direction, one step too far, a fill out of order, or a change in a constant dimension) of two dimensions, so every value appears in two options (Pallentin, Danner & Rummel, 2023). Choosing by most shared features, by majority value or as the odd one out is right at chance (1 in 4) on generated items. Two distractors break one rule, one breaks two. The price of four balanced options is that each item tests two dimensions: level 1 its rule and a constant one, level 3 two of its three rules (chosen per item), and all options show the third rule correctly. Without a time limit the task measures power; RTs are timed from the drawn item to the touch-down, but this timing has not been validated on real devices. The items have no norms; compare groups or sessions within a study.

Scientific evidence

  • In the Raven matrices, all participants encode and induce the regularities of a problem incrementally; individuals differ mainly in inducing abstract relations and in managing many problem-solving goals in working memory (Carpenter, Just & Shell, 1990).
  • Software that combines the relation types of the Standard Progressive Matrices produced generated items that covered and extended the difficulty range of the originals in a norming study (Matzen et al., 2010).
  • In an IRT review of these generated items, item types grew harder from one-relation to logic problems; the authors caution that generated distractors need checking (Harris et al., 2020).
  • Response elimination lowers the g-loading of figural matrices, and response alternatives built to prevent it improve construct validity (Arendasy & Sommer, 2013); distractors from a facet design, with every value shown equally often, prevent counting strategies (Pallentin, Danner & Rummel, 2023).
  • Even mild time pressure lowers accuracy and constructive matching in Raven's matrices (Gonthier, 2023).